Development of TiN/Ni–9.5 at.% W paramagnetic composite substrates for 2G high-temperature superconductors
DOI (Low Temperature Physics):
https://doi.org/10.1063/10.0043140Ключові слова:
coated conductors, Ni–W, paramagnetic, titanium nitride, 2G HTS, macroscopic strains, cube texture, {001}<100>Анотація
Досліджено можливості виготовлення двошарових стрічокпідкладок на основі парамагнітного сплаву Ni–W із покриттям TiN, які можуть використовуватися як «seed layer» в архітектурі надпровідників другого покоління (2G HTS). Дослідження проводилися у таких напрямках: синтез, механічна та термічна обробка сплавів Ni–W з кубічною гранецентрованою (fcc) кристалічною структурою, а також вивчення впливу умов осадження TiN на можливість керування властивостями двошарової системи TiN/Ni–9,5 ат.% W. Було виявлено ефект взаємного впливу між підкладкою та покриттям, що призводить до корельованого підвищення ступеня кубічної текстури {001} у обох компонентах двошарової системи.
Посилання
1. A. Goyal, “Epitaxial superconductors on rolling-assisted biaxially-textured substrates (RABiTS): A route towards high critical current density wire,” Appl. Supercond. 4, 403 (1996). https://doi.org/10.1016/S0964-1807(97)00029-X
2. R. Bhattacharya, S. Phok, W. Zhao, and A. Norman, “Electrodeposited biaxially textured buffer layers for YBCO superconductors,” IEEE Trans. Appl. Supercond. 19, 3451 (2009). https://doi.org/10.1109/TASC.2009.2019603
3. M. Sieger, “Ba2y(Nb/Ta)O6–doped YBCO films on biaxially textured Ni–5 at.% W substrates,” IEEE Trans.Appl. Supercond. 26, 7500305 (2016). https://doi.org/10.1109/TASC.2016.2539254
4. D. Larbalesrier, “Critical currents and magnet applications of high-Tc superconductors,” Phys. Today 44, 74 (1991). https://doi.org/10.1063/1.881305
5. A. Goyal, D. P. Norton, J. D. Budai et al, “High critical current density superconducting tapes by epitaxial deposition of YBa2Cu3Ox thick films on biaxially textured metals,” Appl. Phys. Lett. 69, 1795 (1996). https://doi.org/10.1063/1.117489
6. D. P. Norton, A. Goyal, J. D. Budai et al, “Epitaxial YBa2Cu3O7 on biaxially textured nickel (001): An approach to superconducting tapes with high critical current density,” Science 274, 755 (1996). https://doi.org/10.1126/science.274.5288.755
7. J. G. Bednorz and K. A. Müller, “Possible high Tc superconductivity in the Ba–La–Cu–O system,” Z. Physik B: Condens. Matter 64, 189 (1986). https://doi.org/10.1007/BF01303701
8. M. K. Wu, J. R. Ashburn, C. J. Torng et al, “Superconductivity at 93 K in a new mixed-phase Y–Ba–Cu–O compound system at ambient pressure,” Phys. Rev. Lett. 58, 908 (1987). https://doi.org/10.1103/PhysRevLett.58.908
9. Y. Iijima, N. Tanabe, O. Kohno, and Y. Ikeno, “In-plane aligned YBa2Cu3O7−x thin films deposited on polycrystalline metallic substrates,” Appl. Phys. Lett. 60, 469 (1992). https://doi.org/10.1063/1.106514
10. M. Paranthaman, D. F. Lee, A. Goyal et al, “Growth of biaxially textured RE2O3 buffer layers on rolled-Ni substrates using reactive evaporation for HTS-coated conductors,” Supercond. Sci. Technol. 12, 319 (1999). https://doi.org/10.1088/0953-2048/12/5/313
11. D. Dimos, P. Chaudhari, and J. Mannhart, “Superconducting transport properties of grain boundaries in YBa2Cu3O7 bicrystals,” Phys. Rev. B 41, 4038 (1990). https://doi.org/10.1103/PhysRevB.41.4038
12. J. Mannhart, “Current transport across grain boundaries in superconducting YBa2Cu3O7 films,” J. Supercond. 3, 281 (1990). https://doi.org/10.1007/BF00625269
13. M. Kawasaki, E. Sarnelli, P. Chaudhari, A. Gupta, A. Kussmaul, W. Lee, and J. Lacey, “Weak link behavior of grain boundaries in Nd-, Bi-, and Tl-based cuprate superconductors,” Appl. Phys. Lett. 62, 417 (1993). https://doi.org/10.1063/1.108920
14. J. H. Durrell, M. J. Hogg, F. Kahlmann, Z. H. Barber, M. G. Blamire, and J. E. Evetts, “Critical current of YBa2Cu3O7−δ low-angle grain boundaries,” Phys. Rev. Lett. 90, 247006 (2003). https://doi.org/10.1103/PhysRevLett.90.247006
15. J. Mannhart, H. Hilgenkamp, B. Mayer et al., “Current transport across grain boundary networks in high-Tc superconductors,” Physica A 168, 345 (1990). https://doi.org/10.1016/0378-4371(90)90386-7
16. H. Cardona, H. Suzuki, T. Yamashita, K. H. Young, and L. C. Bourne, “Transport characteristics of Tl2Ba2CaCu2O8 bicrystal grain boundary junctions at 77 K,” Appl. Phys. Lett. 62, 411 (1993). https://doi.org/10.1063/1.108918
17. S. E. Babcock, X. Y. Cai, D. L. Kaiser, and D. C. Larbalestier, “Weak-link-free behaviour of high-angle YBa2Cu3O7–δ grain boundaries in high magnetic fields,” Nature 347, 167 (1990). https://doi.org/10.1038/347167a0
18. S. Thadela, M. Bathula, U. Choudhury, B. Rao, A. Usoskin, and V. V. Rao, “Development of a lab-scale high-Tc superconducting power cable,” Indian J. Cryogen. 4, 181 (2018). https://doi.org/10.5958/2349-2120.2018.00031.6
19. A. Usoskin and B. Prause, Superconducting materials: 2nd HTS generation, status and outlook, Proc. CIRED 2009, Prague, 8–11 June 2009, pp. 1–29, Paris: CIRED (2009), Pt. 2, pp. 1–29.
20. Y. Ma and L. Xiao, “Second generation YBCO coated conductors: A review,” Chin. Sci. Bulll. 49, 2435 (2004). https://doi.org/10.1007/BF03183707
21. A. P. Malozemoff, D. T. Verebelyi, S. Fleshler, D. Aized, and D. Yu, “HTS wire status and prospects,” Physica C 386, 424 (2003). https://doi.org/10.1016/S0921-4534(02)02201-3
22. R. Gartner, R. Hühne, J. Engelmann, J. J. Hänisch, R. Kaltofen, S. Oswald, L. Schultz, and B. Holzapfel, “High-Jc YBCO coated conductors based on IBAD-TiN using stainless steel substrates,” IEEE Trans. Appl. Supercond. 21, 2920 (2011). https://doi.org/10.1109/TASC.2010.2080657
23. A. Sundaram, Y. Zhang, A. R. Knoll et al., “2G HTS wires made on 30 μm thick hastelloy substrate,” Supercond. Sci. Technol. 29, 104007 (2016). https://doi.org/10.1088/0953-2048/29/10/104007
24. K. Kakimoto, Y. Iijima, and T. Saitoh, “Fabrication of long-Y123 coated conductors by combination of IBAD and PLD,” Physica C 392-396, 783 (2003). https://doi.org/10.1016/S0921-4534(03)01129-8
25. Gao Mangmang, F. Zhang, S. Liang et al., “Influence of cube texture development on magnetic properties of Ni–5 at.% W alloy substrates,” J. Magn. Magn. Mater. 469, 515 (2019). https://doi.org/10.1016/j.jmmm.2018.09.029
26. J. Gnilsen, A. Usoskin, M. Eisterer, U. Betz, and K. Schlenga, “Current-voltage characteristics of double disordered REBCO coated conductors exposed to magnetic fields with edge gradients,” Supercond. Sci. Technol. 32, 104002 (2019). https://doi.org/10.1088/1361-6668/ab3c09
27. A. O. Ijaduola, J. R. Thompson, A. Goyal, C. L. H. Thieme, and K. Marken, “Magnetism and ferromagnetic loss in Ni–W textured substrates for coated conductors,” Physica C 403, 163 (2004). https://doi.org/10.1016/j.physc.2003.12.003
28. D. Dimos, P. Chaudhari, J. Mannhart, and F. K. LeGoues, “Orientation dependence of grain-boundary critical currents in YBa2Cu3O7−δ bicrystals,” Phys. Rev. Lett. 61, 219 (1988). https://doi.org/10.1103/PhysRevLett.61.219
29. V. Subramanya Sarma, J. Eickemeyer, L. Schultz, and B. Holzapfel, “Recrystallisation texture and magnetisation behaviour of some FCC Ni–W alloys,” Scripta Materialia 953–957, 50 (2004). https://doi.org/10.1016/j.scriptamat.2004.01.004
30. R. Hühne, R. Gärtner, S. Oswald, L. Schultz, and B. Holzapfel, “Coated conductor architectures based on IBAD-TiN for high-Jc YBCO films,” Physica C 471, 966 (2011). https://doi.org/10.1016/j.physc.2011.05.101
31. U. Gaitzsch, J. Hänisch, R. Hühne, C. Rodig, J. Freudenberger, B. Holzapfel, and L. Schultz, “Highly alloyed Ni–W substrates for low AC loss application,” Supercond. Sci. Technol. 26, 085024 (2013). https://doi.org/10.1088/0953-2048/26/8/085024
32. J. Eickemeyer, R. Hühne, A. Güth, C. Rodig, U. Gaitzsch, J. Freudenberger, L. Schultz, and B. Holzapfel, “Textured Ni–9.0 at.% W substrate tapes for YBCO-coated conductors,” Supercond. Sci. Technol. 23, 085012 (2010). https://doi.org/10.1088/0953-2048/23/8/085012
33. J. Cui, H. L. Suo, J. H. Wang ., “Effect of annealing temperature on cube texture formation in Ni7W/Ni12W/Ni7W compound substrate,” Phys. Met. Metallogr. 121, 261 (2020). https://doi.org/10.1134/S0031918X20030060
34. R. Tomov, A. Kursumovic, A. M. Majoros, R. Hühne, B. A. Glowacki, J. E. Evetts, A. Tuissi, E. Villa, S. Tonies, Y. Sun, A. Vostner, and H. Weber, “Development of coated conductors on biaxially textured substrates: The influence of substrate parameters. processing of high temperature,” Superconductors 140, 119 (2006). https://doi.org/10.1002/9781118405932.ch11
35. V. V. Derevyanko, M. S. Sungurov, T. V. Sukhareva, V. A. Finkel’, and Yu. N. Shakhov, “Effect of the composition and the crystal structure on the electrophysical properties of the Ni1–xWx system at low temperatures,” Phys. Solid State 60, 1930 (2018). https://doi.org/10.1134/S1063783418100062
36. Y. Ji, H. L. Suo, Z. L. Zhang ., “Strong cube texture of super-high tungsten Ni–W alloy substrates used in REBCO coated conductors,” J. Alloys Compd. 820, 153430 (2020). https://doi.org/10.1016/j.jallcom.2019.153430
37. M. S. Soliman and F. A. Mohamed, “Creep transitions in an Al–Zn alloy,” Metall Mater. Trans. A 15, 1893 (1984). https://doi.org/10.1007/BF02664903
38. M. S. Sungurov, V. V. Derevyanko, S. A. Leonov ., “Substrates with a cubic texture based on paramagnetic Ni–W alloy ribbons with thin TiN coating for second-generation high-temperature superconductors,” Tech. Phys. Lett. 40, 797 (2014). https://doi.org/10.1134/S1063785014090314
39. M. S. Sungurov and V. A. Finkel, “Texturing in a Ni–W/TiN thin-film system,” Tech. Phys. 63, 1182 (2018). https://doi.org/10.1134/S1063784218080200
40. A. Bendavid, P. J. Martin, M. Wittling, and T. J. Kinder, “Deposition and modification of titanium nitride by ion assisted arc deposition,” J. Vac. Sci. Technol. A 13, 1658 (1995). https://doi.org/10.1116/1.579747
41. I. Axenov, V. G. Padalka, A. N. Belokhvostikov, N. S. Repalov, and V. M. Khoroshikh, “Plasma flux motion in a toroidal plasma guide,” Plasma Phys. Control Fusion. 28, 761 (1986). https://doi.org/10.1088/0741-3335/28/5/002
42. M. M. Borodkina and E. N. Spektor, X-Ray diffraction analysis of the texture of metals and alloys (Metallurgiya, 1981).
43. L. A. I. Kestens and H. Pirgazi, “Texture formation in metal alloys with cubic crystal structures,” Mater. Sci. Technol. 32, 1303 (2016). https://doi.org/10.1080/02670836.2016.1231746
44. H. Friedman and L. S. Birks, “Thickness measurement of thin coatings by X-ray absorption,” Rev. Sci. Instrum. 17, 99 (1946). https://doi.org/10.1063/1.1770449
45. M. Witte, “Measurement of coating thickness with X-ray diffraction,” Powder Diffr. 38, 112 (2023). https://doi.org/10.1017/S088571562300012X
